Microlaryngoscopy tube

FEATURES

A microlaryngoscopy tube (also generally called 'MLT', although this is a registered trademark for Covidien Inc.) is in essence a pediatric-sized standard ETT with an adult length or an adult standard ETT with a pediatric-sized diameter, whichever way you want to look at it.

'MLT' = massively long tube

These tubes come in three sizes, 4.0, 5.0 and 6.0mm. The size 5.0mm tube is the most commonly used.

This picture shows two 5.0mm endotracheal tubes, the 'standard' one below, which is used in pediatric practice, and the microlaryngoscopy one above, which is of course longer and has a bigger 'adult' cuff.

A close-up comparing the cuffs of the 5.0 MLT (above) and 5.0 standard pediatric 5.0 ETT (below)


USES

Microlaryngoscopy tubes are used, as the name suggests, in laryngeal surgery. Particularly in vocal chord surgery, the smaller diameter of these tubes allows the surgeon an easier view and access to the vocal chords and adjacent structures.


SPECIAL CONSIDERATIONS

One thing to keep in mind when using ETTs of such small size in adults is the relatively high resistance to gas flow through these tubes, meaning that comparatively high airway pressures are required to deliver the desired tidal volumes. Similarly, gas flow is slow during expiration, meaning that lower I:E ratios are often necessary to allow for complete expiration.

Pressure control ventilation through a size 5.0 MLT. Note the very low I:E ratio of 1:6 necessary to accomodate the very prolonged expiratory gas flow. Niote also the high airway pressure, which is of course measured by the ventilator proximal to the MLT and does not reflect actual airway pressure because of the high resistance of the MLT.